Double-walled chimney kit Vilpra Sauna 0.8 mm d.115/215 mm

SKU: SET1-DW50Sauna-115-V

We offer a standard chimney package, which you will need when installing a chimney in a standard outdoor sauna:

DW insulated chimney segment d.115/215, L–1.0 m – 1 pcs.
DW insulated chimney segment d.115/215, L–0.5 m – 1 pcs.
DW upper nozzle d.115/215 – 1 pcs.
DW lower nozzle d.115/215 – 1 pcs.
Decorative ring d.215/515 – 1 pcs.
SW liner segment d.115, L–0.5 m – 2 pcs.
Connecting clamp d.115, H–12 mm – 3 pcs.
PROROX insulation for passage through the floor, 50 mm, H–500 mm, up to Ø215 mm – 1 pcs.
SUPERWOOL insulation for passage through the floor, 50 mm, H–200 mm, up to Ø280 mm – 1 pcs.
Roof sealing part AL + EPDM, Ø160–300 mm, 0–45° – 1 pcs.
Roof sealing part tightening ring d.215 – 1 pcs.
Cap d.115 – 1 pcs.
SW transition d.115+/116 – 1 pcs.
Additional part used if it is necessary to connect to a stove from another manufacturer.

3-5 Days Product information updated: 2026-11-12

Description

Product information updated 2026-11-12

The double-wall chimney system DW50M SAUNA is intended for removing combustion products from sauna heaters by natural draft.

Chimneys are made of 0.8 mm stainless steel (outer wall, inner 0.5 mm thick), and the double-wall chimney elements have a 50 mm insulation layer, which helps ensure the safety of the sauna even at the highest temperature.

Inner wall EN 1.4301 (AISI 304), thickness S=0.8 mm;

Outer wall EN 1.4301 (AISI 304), thickness S=0.5 mm.